SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklifts
Used Forklift Parts - Unavoidably, lift truck parts would eventually wear out and need replacing. The alternative of acquiring new components can become costly so one more idea is to buy used parts. This could save much cash in the long run. It is a good idea to purchase used lift truck components which have been remanufactured. These parts will guarantee that you are getting components which will work for a long time and be productive.
Broken or worn parts that are reproduced are a very cost effective solution than rebuilding. With rebuilding parts, just the components which are worn out or broken get replaced, which means that other wearable parts can break down soon after acquisition.
Remanufacturing however provides the best assurance for second-hand components. Reproduced components are taken apart and cleaned and then all wearable pieces are changed. All wearable parts are replaced regardless of age or wear which is another rationale why remanufactured parts in general run so much better. Whichever part within the part is new and this provides far longer life to the used part. Based on the forklift components that are being redone, the cleaning process and the entire remanufacturing process would differ.
The engines are cleaned after a complete disassembly. Several engine components such as spark plugs, pistons, rings, valve springs, filters, and valves can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to guarantee that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are another item which is oven cleaned after being disassembled. The transmission is then washed. A comprehensive examination is done to check for any cracks. Bushings, seals and bearings are all replaced. Usually, the replacement parts utilized on transmission parts meet OEM specifications.
A few lift truck parts like the water pump, torque converters, the alternator, the starter and steer axles can be quite serviceable after worn components are replaced. The electronic control in the electric forklift is maintained by the control card. This particular card could also be remanufactured with replacing all aged and worn out parts. Not like different lift truck parts the control card could only have the worn and aged parts replaced.
Components that are reproduced have to be thoroughly examined upon reassembly to guarantee they are in good condition prior to being sold. When acquiring these parts, it is a good idea to make certain that they have undergone all of the proper testing and inspections. On certain bigger components such as engines, transmissions and steer axles, OEM specification replacement parts should be utilized.
The dealer of used forklifts and components could ensure that the reproduced parts have met OEM specifications and that these components meet industry standards. Lots of details go into remanufacturing second-hand parts. This attention to detail offers more serviceability out of reproduced parts opposed to the parts that were just rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
San Angelo, Texas
forkliftpartssanangelo.com
Email Us
About Us